Dangerous Power G5 — Ultimate Guide

A lightweight spool-style gun that earned a strong reputation for smooth shooting at an aggressive price.

Technical Specifications

OperationElectropneumatic spool
Firing Modessemi-auto, ramping
Caliber.68
Feed SystemForce-fed
Air SourceHPA
Operating Pressure~150 psi
Weight (unloaded)1.9 lbs
Street Price$180-320 (used)
MaintenanceModerate

Notable features: Light spool design, Smooth shot, On/off ASA

Pros & Cons

Pros

Cons

Best for: Value tournament players, Used buyers, Speedball

Setup & First-Day Tuning Guide

  1. Charge Batteries 24 Hours Before — Charge the Dangerous Power G5's battery fully before your first session. Bring a spare — a low battery causes dump-fire and board errors that mimic broken gun symptoms.
  2. Lube Bolt & Carrier Before Air — Slide the bolt back by hand — it should move freely. Apply Dow 33 to all bolt and carrier O-rings. Never lube the solenoid.
  3. Set Operating Pressure to Spec — The Dangerous Power G5 runs at ~150 psi. Set your HPR per the manual — never exceed rated pressure.
  4. Chronograph via HPR, Then Dwell — With eyes ON, fire 5 shots and read the chrono. Adjust HPR to approach your target velocity (usually 280 fps). Change dwell (1ms at a time) only after HPR is dialed.
  5. Keep Anti-Chop Eyes ON — Turn eyes ON for your first outing. A slight hesitation is normal — a force-feed loader (Dye Rotor, Virtue Spire) eliminates it entirely.
  6. Set Firing Mode Before the Field — Set the gun to semi-auto mode. Most recreational fields enforce semi-auto — confirm mode is correct before your first game.

Maintenance Schedule

IntervalTaskDetail
After every sessionBarrel, bolt & eye port cleanSqueegee twice, bolt and carrier wipe. Clean eye ports with a dry cotton swab.
Every 5 sessionsBolt & carrier O-ring serviceClean O-rings with isopropyl, dry, apply Dow 33. Inspect solenoid externally — plunger should be clean and dry.
Every seasonLPR serviceRemove LPR, clean piston and O-rings, re-lube. 20-minute job that significantly improves consistency.
AnnuallyFull serviceAll O-rings replaced. Board terminals cleaned. Solenoid externally cleaned with contact cleaner (not lube). Firmware update if available.

Spool o-ring care; keep regulator clean.

Common Problems & Troubleshooting

Wide velocity spread
Cause: Worn bolt O-rings (most common); LPR drift
Fix: Bolt carrier O-ring wear is the #1 cause of inconsistency in guns like the Dangerous Power G5. Remove bolt, inspect O-rings, re-lube or replace as a set.
Gun won't power on
Cause: Low battery voltage; terminal corrosion
Fix: Test battery — should read 9V+ (alkaline) or 7.4V+ (LiPo). Clean terminals with isopropyl. Check the manual for the factory reset sequence.
Air dumps continuously
Cause: Solenoid failure; low battery
Fix: De-gas immediately. Check battery first — low voltage causes dump-fire. If battery is good, inspect solenoid for debris or O-ring failure.
Double-firing / bounce
Cause: Dwell too high; debounce too sensitive
Fix: Reduce dwell 1ms at a time until resolved. Never go below 4ms on spool guns.
Eyes not working with eyes on
Cause: Paint residue blocking eye ports
Fix: Clean eye ports with a dry cotton swab — this fixes 95% of apparent eye failures.
Firing mode won't change
Cause: Board lock mode
Fix: Download the board manual PDF — the unlock sequence is a button-hold pattern during power-on.

Upgrade Path

Frequently Asked Questions

Is the Dangerous Power G5 good for beginners?
Yes, with some paintball experience. The Dangerous Power G5 rewards players who understand basic maintenance and operation.
Does the Dangerous Power G5 run on CO2 or HPA?
Compatible with HPA. HPA is required — CO2 can damage solenoid O-rings on electropneumatic guns.
What is the operating pressure of the Dangerous Power G5?
The Dangerous Power G5 operates at ~150 psi. Match your regulator output to this spec.
How hard is the Dangerous Power G5 to maintain?
Moderate — regular bolt and eye-port cleaning, plus annual LPR service. Spool o-ring care; keep regulator clean.
What loader does the Dangerous Power G5 need?
A force-feed loader (Dye Rotor, Virtue Spire) is needed for the Dangerous Power G5's fire rate. A gravity hopper limits you to ~6 BPS.
How much does the Dangerous Power G5 cost?
New: $N/A MSRP, typically $180-320 (used) on the street. Used prices vary — check BST forums and eBay for current asking prices.
What barrel thread does the Dangerous Power G5 use?
The Dangerous Power G5 shoots .68 caliber. Confirm the specific thread pattern for your variant before ordering a barrel.
What firing modes does the Dangerous Power G5 support?
Supported modes: semi-auto, ramping. Most recreational fields require semi-auto only.
How heavy is the Dangerous Power G5?
1.9 lbs unloaded. With a full hopper and HPA tank, expect roughly 4.4–5.4 lbs total.
Is the Dangerous Power G5 worth buying?
A lightweight spool-style gun that earned a strong reputation for smooth shooting at an aggressive price. Strengths: Great value spool, Light. Trade-offs: Discontinued, Smaller current support.

Compare prices and see live listings on the Dangerous Power G5 gun page.